Combustible Gas Detect Alarm Controller
01
CAATM CA2100E 128 channels Wall-mounted gas alarm controller
Product description
The gas detection control panel is wall mounted and is linked up with gas sensors, such as the CA228 series, to form an integrated system for gas detection and alerting. This panel features a variety of external control ports, giving users the flexibility to connect and configure multiple detectors, and to conduct on-site monitoring and alerting with simple settings. The system is specifically engineered for detecting flammable gases and showing the concentration of the detected gas in percentage of the Lower Explosive Limit (% LEL). If the gas concentration surpasses the preset alarm level, the output circuit is triggered to initiate a series of alarm actions, including alarms, ventilation, and power cutoff.
The power switch and circuit board of the main unit are each protected by a protective circuit, providing a two-tiered safety mechanism. The device also has an emergency power supply to maintain system operation during power failures. Additionally, it comes with a data logger to prevent data loss in case of power interruptions. The system offers real-time monitoring of the sensor's status and is equipped with a self-check feature for faults. It will immediately alert if a fault or gas leak is detected.
Technical Parameters
|
Display |
Main power supply |
Backup Power Supply |
Power consumption |
Communication Mode |
| LCD screen display | AC220V±15%, 50Hz±1 | DC12V/5.5Ah*2 | <=15W | RS485/4~20mA |
|
Transmission Distance |
Operating Environment |
Dimensions |
Weight |
Networking Mode |
| 1500m | -25°C~55°C | 360*238*98.5(mm) | 7.5kg | Wired transmission |
