Combustible Gas Detect Alarm Controller
01
CAATM CA-2100M Industrial 3-channel Wall-mounted gas alarm controller
Product description
The combustible gas alarm controller is wall mounted and used to connect combustible gas detectors, such as the CA228 series, ultimately forming a combustible gas detection and alarm system. This product has 3-channel external control ports, allowing users to freely choose the access port for attaching detectors and perform on-site detection and alarm through simple settings. This system is mainly used for detecting combustible gas and displaying the detected gas concentration (% LEL). When the concentration of a certain gas on site is higher than the set alarm value, the output contact is closed to drive a series of alarm actions, such as alarm, exhaust, disconnection switch, etc.
The power switch and circuit board of the host each carry a layer of protective circuit, providing dual protection and greater safety. The host comes with a backup power supply, which can ensure the continuous operation of the system when the power is cut off. In addition, the product is equipped with a black box, no data loss in case of power failure. The product can display the working status of the detector in real time, with a fault self checking function. Once a fault or gas leak is detected, it will immediately prompt.
Technical Parameters
|
Display |
Main power supply |
Backup Power Supply |
Power consumption |
Communication Mode |
| Digital tube display | AC220V±15%, 50Hz±1 | DC3.7V/2200mAh*2 | <=10W | RS485 |
|
Transmission Distance |
Operating Environment |
Dimensions |
Weight |
Networking Mode |
| 1500m | -25°C~55°C | 220*170*50(mm) | 1.5kg | Wired transmission |
